| 
One of the most awesome upgrades you can do is get a $9.99 airplane
motor from Hobby People that is faster than the Baja, or the Big
Block and it will bolt straight up to the Big Block motor plate.
Or you can drill your stock motor plate to take it. It will work
with the STOCK ESC and it is FAST...

This is the tag for the motor. It is a Watt Age 370 and you can
see the part number in the picture. What a deal eh? This motor
smokes, I have beaten a Mamba Brushless racing it at So Cal. The
Mamba was a bit faster on the straight but I was a smother driver
and beat him....

I got these awesome aluminum rear hubs on ebay. I also got bearings
on ebay. The aluminum hubs are made by GPM and cost me about 10
bucks if I remember right.

I have the Losi oil filled shocks, I run 35 wt oil in them. The
stock oil was way to thin. I also have the GPM Titanium Tie Rods,
from ebay again and so cheap. Just search ebay for "GPM Mini
T" and you will find many affordable quality parts.

Looks fast just sitting there eh? I like the stock body so I got
a clear one and painted it with the official RacerNine.com paint
scheme.

This is a great tip for any racer or basher of any RC car or truck.
I have every manual for every piece of equipment and car item
in the bottom of my big race bucket. I load it up and take it
racing. I am never without the manual for any charger, or truck
or engine or motor, ESC, Temp Gun, you get the idea... Keep them
all, and have them handy...

This is the view of my Mini-T from the top, it has many stock
parts still, and yes, ESC and servo are stock. I had to go through
about 3 servo's before i got a good one that does not die. When
you get a good one, try not to hit the wall with it and it will
last a very long time. Some of them just go out for no reason.
It is the weakest part of this very cool truck I must say I am
very dissapointed in Losi for putting out such a bad servo.

If you look close you can see plastic washers on my camber links
where they attach to the outer hubs. This pushes the tie rods
out away from the springs and they do not rub any longer. With
my Losi shocks, this thing handles like my 1/10 scale truck.
|