Mammoth ST
Page 1, |Page
2,| Page3,| Page
4,| Page 5,| Page 6,| Page 7,| Page 8,| Page 9,| Setup
Page
The pics are all from my first Mammoth ST. I am now racing the
Mammoth ST Pro kit from XTM. Here is the setup info on the Mammoth
ST Pro that I raced in this vid
West
Coast Shootout #3
Setup:
Lay down the front and rear shocks as much as
possible
50wt shock oil front and rear shocks
White springs
Rear THICK roll bar
No front roll bar
Arms level front
Chassis level after arms level, makes rear a tic low
2 degrees negative camber rear tires
1 degree negative camber front tires
Rear wheel base in short position
13 CB with Mugen Aluminum shoes and 1.1 springs
STS .28 Dadders Stage 2 mod engine
XTM 30% Fuel SH #5 plug
XLB tank
Brakes biased to rear, can lock rears, fronts will NOT lock,
but have braking
Medium offset proline Maxx size rims with Maxx crimefighters
tires
( the stock offset is not enough, needs to be a bit wider )
HiTech Titanium 300 oz steering servo and Aluminum bellcranks
HiTech 945 throttle brake servo
Big Air Satin finish aluminum Arms
RC Visions hing pin retainers
Planetary Diffs, 30k front 100k center Zero K rear (stock Greese)
(diffs shimmed properly before it ever ran, has never skipped)
Dadders front Chassis brace, ST Pro stock rear chasis bracing
STock ST Body with standard R9 Ketchup and Mustard paint job
Airtronics M8 Radio with Airtronics Synth module and synth reciver
Steering set to -50 EXP throttle brake at 0 EXP
Driver 260 lbs, 44 years old, funky hat, broken $10.00 Wal-Mart
shades
Page 1, |Page
2,| Page3,| Page
4,| Page 5,| Page 6,| Page 7,| Page 8,| Page 9,| Setup
Page
